When you first install 3M carbon fiber you may not think of ever removing it, but eventually you will want to try a new pattern or the vinyl will be damaged and need to be repaired. 3M Di-noc vinyl has a ten-year warranty when used indoors, but for vehicles and other items used outdoors, the warranty is five years.
3M Carbon Fiber has a grooved adhesive pattern that, when applied correctly, helps eliminate air bubbles for a professional appearance, but also reduces the risk of the vinyl lifting and peeling after installation. This design allows the vinyl to adhere firmly to the surface area, yet you can still remove it without much hassle when the need arises.
Removing the carbon fiber is just as important as installing it because you don’t want to cause any damage to the surface. When it comes time to remove the vinyl, there are certain techniques that can make the process go smoothly without damaging the surface underneath.
How to remove 3M carbon fiber vinyl
When removing carbon fiber vinyl, you must work carefully to avoid damaging the vehicle or the object under the vinyl. When working with large areas, it is easier to cut through the vinyl before attempting to remove it. This will make the material easier to work with and peel off. Use a sharp razor to cut the vinyl, but don’t put a lot of pressure on the razor. You just need to fold the vinyl by making a shallow cut. If you press too hard, you will poke through the vinyl and damage the object underneath.
Using heat to warm the surface of the area will also make it easier to peel off the vinyl. You can do this using a heat gun or blow dryer, but you don’t want to overheat the area. The idea is to heat the 3M Di-noc carbon fiber to make it more flexible and loosen the adhesive so it peels off without tearing or tearing. If you overheat it, it will be harder to work with because it will be too soft and won’t peel off as easily.
clean the area
Once you have removed all of the 3M Carbon Fiber Vinyl, you will need to clean any adhesive residue from the surface. 3M General Purpose Adhesive Cleaner is a product specially designed to clean these types of adhesives and will not damage paint when cleaning. Once all adhesive is removed, wash the area with a mild soap and water or wipe the area with a damp cloth if washing is not an option.
If you plan to reapply the vinyl, allow the area to dry completely before reapplying. 3M Carbon Fiber gives you many ways to make your vehicle and other items stand out and show off your unique personality. Since you can easily remove and reapply the vinyl whenever you want, it’s a practical and inexpensive way to express your individuality.
